PCAP Touch Guide Motherboard for Guide Query Counter, WF-G3601, AndroidSBC, Casablanca

TL;DR: PCAP Touch Guide Motherboard for Guide Query Counter

AndroidSBC sourcing desk: smart guide kiosk board pricing held flat through the current quarter serving Casablanca, Morocco. The WF-G3601 smart guide kiosk Android motherboard spans the mall smart guide kiosk and eleven sister models in the WF-G series, all built on the RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC with the ARM Mali-G52 2EE GPU, HDMI 2.0 4K 60fps plus MIPI DSI, and Android 12 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-G family from the Longgang source factory in Shenzhen to Casablanca and Morocco importers who run mall directory, wayfinding, information point, dual-screen promotion, interactive display and outdoor smart city programmes.

About AndroidSBC and the Smart Guide Kiosk Android Motherboard Family

AndroidSBC is the export arm of Wanlin Manufacturing Group and the source factory behind the WF-G smart guide kiosk Android motherboard family. The Longgang plant runs SMT, in-circuit test, functional test and a burn-in station under one roof, with a sustained output of roughly 5000 boards a week on this family and buffer stock held on the RK3588, RK3568, RK3566, RK3288, RK3399, A133, H618 and T527 tiers. For Casablanca integrators that matters at two points in a guide kiosk project: the pilot build, where a 1-3 day sample lead keeps a mall opening date honest, and the volume ramp, where a fixed BOM per production lot keeps Morocco certification files valid across every floor and every site. Certification, carton labelling and palletisation for Morocco are prepared in Shenzhen by the export desk before the Casablanca shipment leaves, and the test reports stay versioned against the board revision.

WF-G3601 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-G3601 (mall smart guide kiosk) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Morocco importers sourcing the WF-G family, the WF-G3601-A variant is the typical configuration for the mall floor guide and tenant query counter use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Smart Guide Kiosk Android Motherboards for Morocco Buyers

The ninth obstacle is fleet software management. A Casablanca rollout can reach hundreds of screens across a mall group fast, and without staged update control and rollback, one bad content build takes the whole Morocco estate down on the same morning.

The content stack is open by design. AndroidSBC documents the cloud content management client, the kiosk-mode lockdown layer and the directory and wayfinding interface on the WF-G family, and provides Morocco integrators with a versioned SDK so the Casablanca deployment can be extended without forking the image. AndroidSBC has now closed the 6th consecutive quarterly window on this family, with 46200 boards scheduled for Casablanca and Morocco on the Casablanca - Shanghai lane as of September 18, 2026.

Competitive Comparison: WF-G3601 vs Competing Smart Guide Kiosk Android Boards

For Morocco buyers the practical comparison is between a vendor that ships a board and a vendor that ships a deployable platform. Casablanca integrators evaluating the WF-G family usually score silicon coverage, peripheral drivers, unattended features and OTA control as a single decision.

• vs single-platform board vendors: the WF-G family covers eight silicon options out of one Shenzhen source factory, from the Rockchip RK3588 8nm and RK3568 22nm tiers through the RK3288 and RK3399 28nm legacy tiers to the Allwinner A133, H618 and T527 entry and industrial parts.
• vs boards shipped without a peripheral driver SDK: the WF-G family arrives with capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay drivers already integrated, so the integrator writes the directory application rather than the driver layer.
• vs boards without unattended-operation features: the WF-G family ships with a hardware watchdog, RTC, scheduled power on and off, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback out of the box.
• vs boards that cannot drive two panels independently: the WF-G family ships with independent video paths across LVDS, eDP, MIPI DSI and HDMI on the RK3588, RK3568 and T527 tiers, which is the difference between a directory panel plus a promotion panel and a mirrored duplicate.

Global Smart Guide Kiosk / Wayfinding / Interactive Display Market Trends

Directory and wayfinding screens are being re-specified as content endpoints rather than as standalone displays. Grand View Research puts the global interactive kiosk market at USD 34.79 billion in 2024, and the segment analysis points to software as the fastest-growing component: the board in a mall smart guide kiosk build has to host the content client, the touch stack and the update channel, which is exactly what Morocco integrators in Casablanca are now writing into tenders.

• Mall floor directories and tenant finders: WF-G3601 is the usual starting point for shopping centre rollouts, with the dual-screen WF-G3399 as the directory plus promotion option.
• Transit, hospital and campus wayfinding banks: the mid-tier WF-G3399 and the industrial WF-G1330 sister SKUs form the public venue ladder, with route planning and multi-language content.
• Promotional walls and in-venue signage networks: WF-G1330 and the entry-tier sister SKUs cover continuous-play directory and campaign screens across a venue estate.

The number that actually moves a Casablanca project is not the market total but the board count per venue, and that is where a multi-tier family earns its keep.

Partner Success Story: Deccan Mall Technologies (retail technology integrator)

A Deccan Mall Technologies rollout in the India retail and commercial segment shows how the WF-G smart guide kiosk Android motherboard family works in practice for Casablanca integrators. Deccan Mall Technologies integrated 46200 WF-G guide boards into mall directories, hospital orientation points and government service counters.

• OEM relationship: AndroidSBC private-label SKU shipped with Deccan Mall Technologies branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay modules.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus ANRT conformity, all bundled into the Shenzhen source-factory shipment.

As Deccan Mall Technologies Solutions Architect for India Retail and Commercial explained: Deccan Mall Technologies serves venues across very different power conditions, and the auto power-on after mains failure plus the wide input tolerance on the WF-G board kept 46200 screens in Casablanca up through a difficult Morocco summer.

Field Report: floor guide counter installation at a community shopping mall

SHENZHEN, September 18, 2026 - Chang An, AndroidSBC field desk. Before the cartons closed, every WF-G3601 board ran a 48-hour soak that kept the mall smart guide kiosk display, network uplink and touch controller active without a single cold restart. The WF-G3601 smart guide kiosk Android motherboard order for Casablanca, Morocco cleared the burn-in station on schedule and is en route via the Casablanca - Shanghai lane.

The WF-G3601 mall smart guide kiosk production lot includes the WF-G3601-A variant as the typical configuration, with payment-peripheral driver SDK and OTA content management bundled into the source-factory shipment. For Morocco integrators, the ANRT conformity plus ANRT type approval with IMANOR safety conformity paperwork is bundled.

Filed by Chang An, AndroidSBC field desk, SHENZHEN. Morocco integrators typically request CE plus local radio interface notification for smart guide kiosk board deployments.

WF-G3601 Application Scenarios

The WF-G3601 mall smart guide kiosk sits inside a twelve-variant WF-G smart guide kiosk Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-G3601-A configuration is the typical build for the mall floor guide and tenant query counter use case, with payment-peripheral driver SDK and OTA content management bundled.

• Shopping centre floor directories and tenant finders: WF-G3601 plus WF-G1331 form the mall-side directory ladder, with independent dual display output and 4K HDMI.
• Compact countertop enquiry and price check terminals: WF-G6180 plus WF-G3601 are the usual pairing where housing depth is limited and the BOM target is fixed.
• Transit, hospital and campus wayfinding banks: WF-G5270 is the dedicated public venue SKU, with route planning, multi-language content and a -20C to 70C window.
• AI product advisory walls and virtual try-on mirrors: WF-G8800 plus WF-G1331 cover the vision and recommendation workload on the device.
• Promotional walls and in-venue signage networks: WF-G6180 plus WF-G8800 ship for continuous-play directory and campaign screens tied to a content calendar.
• Hotel, resort and casino lobby directories: WF-G1331 plus WF-G5270 carry the guest orientation flow in Casablanca.
• Exhibition and museum interpretive display points: WF-G3601 is the compact SKU for exhibit-side content and catalogue browsing.
• Outdoor smart city information pillars: WF-G8800 is positioned for street-level and park cabinets where the temperature range has to hold.
• Venue programmes running in Casablanca: mall directories, supermarket price check, pharmacy enquiry, transit wayfinding, hospital orientation, hotel lobby guides, museum exhibits, campus directories and outdoor information pillars.

Partnership Models for Casablanca Buyers

AndroidSBC opens OEM, ODM and distribution tracks on the WF-G family for Casablanca and Morocco, all backed by one Shenzhen production line and one firmware baseline.

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom Android ROM, custom SKU label and CE / FCC / RoHS files bundled.
• ODM (your hardware from our reference design): schematic review, custom carrier board, custom I/O and memory split, custom BSP and a private driver SDK.
• Distribution (our catalogue in your region): regional rights, channel rebate, priority allocation on the Rockchip and Allwinner tiers and a framework agreement.

The practical benefit for Casablanca and Morocco is that a partner can quote a stock SKU today and a custom variant next quarter without changing factories, firmware or certification files.

Frequently Asked Questions

Does the WF-G smart guide kiosk Android motherboard family support a mall guide kiosk?

Answer: Yes. The WF-G smart guide kiosk Android motherboard family from AndroidSBC ships mall guide kiosk as a stock configuration. The Rockchip RK3588, RK3568, RK3566, RK3288 and RK3399 tiers and the Allwinner A133, H618 and T527 tiers all run the mall guide kiosk firmware baseline with the peripheral driver SDK bundled.

What is the real difference between the RK3568 tier and the other silicon tiers in the WF-G family?

Answer: There are eight silicon options in the WF-G family and RK3568 is one of them. RK3588 leads on AI and multi-screen, RK3568 leads on I/O breadth, RK3566 leads on cost per screen, T527 leads on industrial temperature, RK3288 and RK3399 cover 28nm refreshes, and A133 and H618 lead on BOM. AndroidSBC keeps one firmware baseline across all eight so Morocco integrators can mix tiers inside one venue estate.

Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Morocco?

Answer: Yes. Paperwork is part of the product, not an extra. The WF-G family ships with the CE / FCC / RoHS / REACH set and with ANRT plus ANRT type approval with IMANOR safety conformity for Morocco, so Casablanca integrators can hand the dossier to a mall operator, a transit authority or an inspector on day one.

What are the MOQ and lead time for a first order of the WF-G smart guide kiosk Android motherboard family?

Answer: AndroidSBC accepts sample orders from one piece up on the WF-G family, with a 1-3 day sample lead. The OEM track opens at 100 pieces, the ODM track at 500 pieces, and bulk production runs 15-30 days from BOM sign-off.

Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-G family?

Answer: Yes. AndroidSBC ports Android 10 through Android 15, plus Linux, Ubuntu and Debian, on every WF-G tier. Custom ROM work includes the boot animation, the kiosk lockdown layer, the update channel and the peripheral driver package for Morocco deployments.

How are software updates and long-term support handled on the WF-G family?

Answer: Software support is treated the same way as hardware supply. The WF-G family carries a seven-year firmware commitment, remote configuration, telemetry hooks and staged rollout, so a Morocco deployment can be managed as a fleet rather than as a set of screens.

Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-G family?

Answer: Yes. AndroidSBC ships direct to Amazon FBA or a nominated 3PL for Morocco buyers, on FOB Shenzhen, CIF Port of Casablanca or DDP terms, with serialised labels so each carton can be traced to a production lot.

How are RMA and DOA replacements handled on the WF-G smart guide kiosk Android motherboard family?

Answer: Warranty handling is part of the source-factory relationship: DOA replacement from buffer stock, RMA repair or replacement at the Longgang facility, and a documented turnaround for Casablanca and Morocco partners under the supply agreement.

Contact AndroidSBC: Start Your WF-G3601 Sourcing Conversation

AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the WF-G family. Casablanca integrators can reach the export desk through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

For Casablanca and Morocco buyers the sample lead is 1-3 days and the mass-production lead is 15-30 days. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window.