TL;DR: TF Card Slot Dongle Board with HDR Playback
AndroidSBC software desk: Android 12 baseline and staged OTA channel published for the H618 dongle family serving Casablanca, Morocco. The WF-H618-02 Allwinner H618 Android motherboard spans the 4K60 streaming stick build for OTT platforms and eleven sister configurations in the WF-H618 series, all built on the H618 quad-core ARM Cortex-A53 1.5GHz SoC with the ARM Mali-G31 MP2 GPU, HDMI 2.0a 4K*2K UHD output at 60Hz with HDR pass-through, and Android 12 with OTA upgrade firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-H618 family from the Longgang source factory in Shenzhen to Casablanca and Morocco importers who run streaming sticks, Android TV boxes, IPTV channel lineups, digital signage networks, casting programmes and smart home hubs.

About AndroidSBC and the Allwinner H618 Android Motherboard Family
Wanlin Manufacturing Group runs the Longgang production site where the Allwinner H618 dongle family is assembled, burned in and packed. AndroidSBC handles the export side from the same building, which is why Morocco importers receive a fixed bill of materials per lot instead of a board that silently changes memory or storage between shipments. The AndroidSBC engineering desk keeps one reference image for the whole WF-H618 line, so a Morocco partner developing against the board is testing against the same Android 12 build that ships in volume, not a one-off sample image.
WF-H618-02 Technical Specifications
| Parameter | AndroidSBC WF-H618-02 (4K60 streaming stick build for OTT platforms) | Industry Average |
|---|---|---|
| Processor | H618 quad-core ARM Cortex-A53 1.5GHz SoC | Older dual-core or quad-core Cortex-A7 SoC |
| Process node | 28nm | Older 40nm process |
| GPU | Mali-G31 MP2 | Older Mali-400 or basic 2D GPU |
| Memory | 2GB LPDDR4 | DDR3 512MB or 1GB on competing boards |
| Storage | 16GB eMMC plus TF card up to 64GB | NAND flash 4GB or 8GB on competing boards |
| Video decode | VP9 Profile-2 and H.265 Main10 at 4K 60fps, AVS2 10bit at 4K 60fps, H.264 at 4K 30fps | 1080p decode ceiling on competing boards |
| Display output | HDMI 2.0a 4K*2K UHD output at 60Hz with HDR pass-through | HDMI 1.4 1080p output only |
| Audio and image | MP3, AAC, WMA, RM, FLAC and Ogg audio plus HD JPEG, BMP, GIF, PNG and TIF image | MP3 audio and JPEG image only |
| Wireless and control | WiFi 802.11 a/b/g/n/ac/ax dual-band 2.4G and 5.8G with IR receiver plus 2.4G wireless mouse and keyboard | Single-band 2.4G WiFi 802.11n with no IR receiver |
| Interfaces | 1 HDMI, 2 USB with host and OTG, 1 IR receiver, 1 TF card slot | One USB port and no TF card slot |
| Operating system | Android 12 with OTA upgrade | Android 9 or Android 10 on competing boards |
| Power and reliability | DC 5V/1.5A with blue working and red standby LED, 0C to 40C operating ambient | No RTC and no scheduled power-on |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-H618-02 (4K60 streaming stick build for OTT platforms) holds its 4K HDMI output plus the remote and control path while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For Morocco importers sourcing the WF-H618 family, the WF-H618-02-A variant is the typical configuration for the OTT subscription streaming programme use case, in a compact dongle footprint with a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing Allwinner H618 Android Motherboards for Morocco Buyers
Then there is the content layer. In Morocco the streaming apps the operator already sells have to work on day one, which means the Android 12 build, the language packs and the remote update path have to be right before the first device is plugged in.
The thermal question is handled at the board level rather than in the enclosure. The WF-H618 tier chosen for Casablanca is specified for fanless continuous duty with a hardware watchdog and a scheduled power cycle, and the burn-in record is run at the top of the temperature window rather than at 25C. For the Casablanca programme the milestone landed on September 28, 2026: 100000 boards shipped on the Casablanca - Shanghai lane, seven-year firmware window committed on the whole WF-H618 family.
Competitive Comparison: WF-H618-02 vs Competing Android TV Dongle Boards
The comparison below is the one Casablanca buyers run when they shortlist three Chinese factories, and it is where the WF-H618 family separates from the field.
- Output and control readiness: HDMI 2.0a or 2.1 at 4K*2K UHD with IR, Bluetooth and 2.4G control paths enumerated, so Casablanca integrators mount a locally sourced screen without a pairing pass.
- Bundled integration: HDMI output profile, remote control mapping, language packs, playback modes and the peripheral driver set ship in the carton; competing dongle boards sold to Casablanca usually ship a board only.
- Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the Casablanca integrator to obtain.
- Long-term supply: 16GB onboard eMMC with a TF card slot up to 64GB, one fixed bill of materials per production lot and a seven-year firmware window, against the frequent component swaps seen on competing boards reaching Casablanca.
Global Android TV, OTT Streaming and Smart Display Market Trends
Asia Pacific leads by value and posts the highest regional growth rate, while North America and Europe buy on replacement. For Morocco buyers the practical reading is that the second and third containers matter more than the first, and the 4K60 streaming stick build for OTT platforms has to be re-orderable.
- Entry playback tier: WF-H618-02 covers loop, scheduled and interrupt playback on a single HDMI screen, which is the configuration most small streaming networks standardise on.
- Interactive mainstream tier: WF-H618-09 pairs a 4K HDMI output with IR, Bluetooth and 2.4G control for hospitality rooms, meeting spaces and classrooms.
- Connected and unattended tier: WF-H618-10 adds the RTC, the auto power-on behaviour and the watchdog recovery that retail signage and unattended lobbies require.
For Casablanca partners the commercial conclusion is that the board vendor has to be a factory. A trading company cannot hold a bill of materials across a three-year refresh.
Partner Success Story: Siam Stream Holdings (OTT platform and device integrator)
The Siam Stream Holdings rollout in the Southeast Asian OTT segment shows how the WF-H618 family from AndroidSBC supports Casablanca integrators. Siam Stream Holdings deployed 100000 WF-H618 boards across a regional OTT subscriber base.
- OEM relationship: AndroidSBC private-label SKU shipped with Siam Stream Holdings branding and CE / FCC / RoHS files bundled.
- Silicon lock: Allwinner H618 quad-core ARM Cortex-A53 1.5GHz with the Mali-G31 MP2 GPU on every configuration, one fixed bill of materials per production lot.
- Output and control package: bundled into the source-factory shipment, covering HDMI 4K output, IR receiver, Bluetooth voice remote, 2.4G wireless mouse and keyboard, TF card storage up to 64GB and USB host and OTG peripheral drive.
- Unattended-operation tools: hardware watchdog, RTC, auto power-on after mains failure, scheduled power cycling, kiosk-mode lockdown and staged OTA with rollback bundled.
- Compliance paperwork: CE / FCC / RoHS plus ANRT conformity, all bundled into the Shenzhen source-factory shipment.
In the words of Siam Stream Holdings Device Programme Manager for Southeast Asian OTT: Siam Stream Holdings runs the H618 dongle on a locally built launcher, and 100000 units went into the Casablanca subscriber programme without a firmware fork.
Field Report: OTT streaming stick rollout at a national telecom store network
SHENZHEN, September 28, 2026 - Dian Mo, AndroidSBC field desk. The 4K60 streaming stick build for OTT platforms pilot in Morocco used the WF-H618-02 with the TF card loaded locally, because several sites sit where the network path is unreliable. The WF-H618-02 Allwinner H618 board order for Casablanca, Morocco cleared the burn-in station on schedule and is en route via the Casablanca - Shanghai lane.
The WF-H618-02 4K60 streaming stick build for OTT platforms production lot includes the WF-H618-02-A variant as the typical configuration, with HDMI output profile, remote control mapping and staged OTA management bundled into the source-factory shipment. For Morocco integrators, the ANRT type approval with IMANOR safety conformity paperwork is bundled.
Filed by Dian Mo, AndroidSBC field desk, SHENZHEN. Moroccan distributors ask for French and Arabic language packs plus ANRT approval, and they check the HDMI handshake on locally sourced TV sets.
WF-H618-02 Application Scenarios
The WF-H618-02 4K60 streaming stick build for OTT platforms sits inside a twelve-configuration WF-H618 Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-H618-02-A configuration is the typical build for the OTT subscription streaming programme use case, with HDMI output profile, remote mapping and staged OTA management bundled.
- Streaming stick and TV modernisation: the WF-H618-02 turns an installed television into a 4K streaming screen without replacing the panel.
- Operator and IPTV channel lineups: the WF-H618-03 carries the language packs, the launcher and the OTA client the operator already sells.
- Screen casting and mirroring: the WF-H618-04 takes Miracast, DLNA and AirPlay traffic into meeting rooms and classrooms over dual-band WiFi.
- Hospitality rooms and serviced apartments: the WF-H618-05 pairs the auto power-on schedule with the IR and Bluetooth remote path a guest expects.
- Retail media and menu boards: the WF-H618-06 drives a 4K loop on shopfront and in-aisle screens from onboard eMMC.
- Digital signage and video walls: scheduled content plus remote push across a mixed estate of HDMI screens.
- Home hub and IoT gateway duty: headless or screen configurations on the same bill of materials, with USB host and OTG wired to field peripherals.
- Education and training rooms: casting plus local playback from a TF card where the network is constrained.
- Retrofit programmes in Casablanca: the same compact dongle board re-uses the installed screen, mount and power path, so an estate can be upgraded room by room.
Partnership Models for Casablanca Buyers
Because the WF-H618 family is built at the Longgang source factory, all three tracks below come with the same frozen bill of materials and the same seven-year firmware window.
- Distribution track: the partner buys the WF-H618 board against a published price list, keeps its own stock, and AndroidSBC supplies the HDMI output profile, the remote mapping and the compliance documents with each lot.
- Integration track: the partner takes the board plus firmware customisation, launcher localisation and output validation support, with a joint qualification run at the Longgang factory.
- Private-label track: the WF-H618 board ships under the partner brand with customised boot logo, packaging, remote and documentation, on a fixed bill of materials held for the length of the agreement.
For Casablanca buyers the practical difference between the tracks is who holds the stock and whose name is on the carton, not what is inside the carton.
Frequently Asked Questions
Does the Allwinner H618 board family support a 4K60 streaming stick build for OTT platforms?
Answer: Yes - 4K60 streaming stick build for OTT platforms is supported across the WF-H618 line, and the Casablanca configuration is locked as the reference for later lots so re-orders behave identically.
Which configurations are available in the WF-H618 family for Morocco buyers?
Answer: Twelve configurations are offered and they all share one Android 12 image, so a Casablanca partner can move between them without re-writing the launcher or re-qualifying the streaming applications.
Can one H618 dongle drive a 4K HDMI screen and take IR, Bluetooth or 2.4G input?
Answer: One board covers both. The IR receiver, the Bluetooth path and the 2.4G control dongle are enumerated in the factory image, so the Morocco installer plugs the unit in and the remote works.
What is the minimum order quantity and the sample lead time for Morocco?
Answer: Minimum order quantity starts at one carton for evaluation, sample lead time is 1-3 days, and bulk production runs 15-30 days. AndroidSBC publishes both figures because Casablanca partners are budgeting a rollout, not a single purchase.
Is custom ROM, boot logo or pre-installed app development available?
Answer: Yes. AndroidSBC builds custom Android 12 images with the partner boot animation, launcher, pre-installed application set and UI trimming, and the image is versioned so Casablanca partners can roll back.
How are firmware updates delivered to a Morocco device estate after deployment?
Answer: Firmware is versioned per lot and delivered through the OTA client, with a pilot group, a staged release and a rollback image. Casablanca partners keep control of the schedule.
What shipping terms does AndroidSBC support for Morocco orders?
Answer: AndroidSBC ships on FOB Shenzhen, CIF or EXW terms and can consign to an Amazon FBA warehouse or a 3PL hub, with the Port of Casablanca lane booked against the production slot.
What happens if a unit fails in the field in Morocco?
Answer: The process starts with the serial number. AndroidSBC traces the unit back to its burn-in run, ships a replacement from the same configuration, and the Morocco partner returns the failed unit on the next consolidation lane.
Contact AndroidSBC: Start Your WF-H618-02 Sourcing Conversation
Casablanca integrators can reach the AndroidSBC export desk for the Allwinner H618 dongle family through the following channels:
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
A 1-3 day sample lead applies to Morocco buyers, a 15-30 day mass-production lead to bulk orders, and a seven-year firmware update window to the WF-H618 family.

